ITC T-67350 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system

In stock

The T-67350 IP amplifier is an ideal network audio solution for mid-sized systems that require an interface capable of streaming audio from the Internet and distributing the amplified signal to an installed speaker system.

The T-67350 network amplifier is a 3U rack-mountable device and features a built-in power amplifier with a power rating of 350W. Via dual RJ45 connections, the T-67350 is easily installable anywhere on an existing TCPIP network making the requirement for dedicated and additional control cables redundant. Multiple speakers are connected directly to the unit and are powered by the built-in power amplifier.

Ethernet connectivity provides many advantages such as extremely long cable runs as well as the ability to control the unit remotely and securely. The device can be accessed over IP and parameters such as local program selection, volume and device parameters such as the IP address can be managed remotely. The T-67350 enters into automatic enter standby mode if there is no input detected for 5 minutes and automatically reverts back to normal operation once signal returns.

Additionally,  there is a local line level input for local inputs,  as well as a line level output. There are two levels of priority output: Voice evacuation system (given the highest priority by default) and a local input with secondary priority over program source. This setting can be customized as required. Indicators include output level meter, amplifier power indicator, a protection indicator, and equipment power indicator. The T-67350 features high temperature, overload and short circuit amplifier protection completely built-in. The system can have the addition of up to three wired volume controllers as optional extras.

Category:

> IP network Amplifier with built-in 350W amplifier

> Directly receives streaming audio via the Internet and transmits to 70V, 100V and low impedance speakers

> Completely integrates with almost any existing TCPIP network

> Extremely cost-effective network audio solution for multiple speaker applications

> 5″ LCD screen on the front panel for clear and simple operation

> Zone capabilities include: one unit set as one zone or multiple units set as one zone

> One Aux input and one local microphone input, both with volume control

> Configurable remotely over IP – Volume control, IP address, local program selection etc.

> Voice evacuation system with higher priority and local input with secondary priority

> Local input and program source priority fully customizable

T-67350 Specifications:

Power Output350W
Speaker Output70V, 100V & 4-16ohms
Network InputStandard RJ45
Protocol SupportTCP/IP, UDP, IGMP
Audio FormatsMP3/MP2
Sampling Rate8K~48KHz
Transmit Speed10Mbps
Audio Format16 digit stereo CD level
Frequency Output(+1dB, -3dB)
THDless than 0.5% at 1KHz 1/3 rated power
S/N Ratio65dB
Aux Input350mV
Mic Input5mV
Standby Power Consumption3W
Power Consumption510W
ProtectionHigh temp, overload and short-circuit
Power Supply~230V/50Hz
Dimensions484 x 360 x 132 mm
Weight16kg
Be the first to review “ITC T-67350 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system”

Your email address will not be published.

nineteen − 8 =

Reviews

There are no reviews yet.

Main Menu

ITC T-67350 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system

ITC T-67350 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system