• ITC T-2S350 Series Dual Channel Mosfet Public Address Power Amplifier

    ITC T-2S350 Series Dual Channel Mosfet Public Address Power Amplifier

    ITC T-2S350 Bangladesh

    1) Rack mount design in 3U

    2) 2 unbalanced Line input in type of TRS, and 2 unbalanced Line output in type of TRS

    3) 2 balanced Line input in type of XLR, and 2 balanced Line input in type of XLR

    4) 2 channel has individual volume control

    5) With switcher for ground wire suspension; When multiple devices are connected, the switcher help to avoid noise from ground loop

    6) With complete protection circuit for short, overload, over-heat, etc

    7) 2 modes of power output: constant voltage output at 100V or 70V; constant impedance output at 4 to 16 ohm

    8) Power supply at DC 24V is also allowed

  • ITC T-2S240 Two Channel Power Amplifier

    ITC T-2S240 Two Channel Power Amplifier

    ITC T-2S240 Bangladesh

    • 2 separate amplifiers built into a single unit
    • 3U rack mount form factor
    • 240W rated power per channel
    • 70V, 100V and 4-16ohm speaker outputs for each channel
    • Isolated transformer for safer and more reliable operation
    • Balanced XLR line inputs and unbalanced 1/4 inch XLR line inputs for each channel
    • Balanced XLR type line outputs for each channel can be fed to an additional power amplifier
    • Reliable protection against overheat, overload, clip & short circuit built-in
    • Front panel indicators for power, signal, clip, protection and temp
    • Built-in heat sinkcooling fan ensures long and reliable operational life
  • ITC T-2S120 Two Channel Power Amplifier

    ITC T-2S120 Two Channel Power Amplifier

    ITC T-2S120 Bangladesh

    • 2 separate amplifiers built into a single unit
    • 2U rack mount form factor
    • 120W rated power per channel
    • 70V, 100V and 4-16ohm speaker outputs for each channel
    • Isolated transformer for safer and more reliable operation
    • Balanced XLR line inputs and unbalanced 1/4 inch XLR line inputs for each channel
    • Balanced XLR type line outputs for each channel can be fed to an additional power amplifier
    • Reliable protection against overheat, overload, clip & short circuit built-in
    • Front panel indicators for power, signal, clip, protection and temp
    • Built-in heat sinkcooling fan ensures long and reliable operational life
  • ITC T-2S60 Two Channel Power Amplifier

    ITC T-2S60 Two Channel Power Amplifier

    ITC T-2S60 Bangladesh

    • 2 separate amplifiers built into a single unit
    • 2U rack mount form factor
    • 60W rated power per channel
    • 70V, 100V and 4-16ohm speaker outputs for each channel
    • Isolated transformer for safer and more reliable operation
    • Balanced XLR line inputs and unbalanced 1/4 inch XLR line inputs for each channel
    • Balanced XLR type line outputs for each channel can be fed to an additional power amplifier
    • Reliable protection against overheat, overload, clip & short circuit built-in
    • Front panel indicators for power, signal, clip, protection and temp
    • Built-in heat sinkcooling fan ensures long and reliable operational life
  • ITC T-4S240 240W 4-channel Power Amplifier

    ITC T-4S240 240W 4-channel Power Amplifier

    ITC T-4S240 Bangladesh

    • 4 separate amplifier into one chassis
    • Rack mount amplifier in 3U type
    • 70V, 100V and 4-16ohm speaker outputs for each channel by phoenix types
    • Isolated transformer for human safety operation
    • Balanced phone jack type line input for each channel
  • ITC T-120BU 120W USB Mixer Amplifier with Balanced and Unbalanced Microphone Inputs

    ITC T-120BU 120W USB Mixer Amplifier with Balanced and Unbalanced Microphone Inputs

    ITC T-120BU Bangladesh

    Model: T-120BU
    • USB port and fluorescent screen to display the sound number
    • Previous, play/stop, next and repeat function buttons
    • Remote control over USB for EQ, volume up, volume down and mute
    • 70V, 100V and low impedance 4 to 16 ohms speaker output
    • Balanced and unbalanced microphone inputs
  • ITC-T-60BU 60W USB Mixer Amplifier with Balanced and Unbalanced Microphone Inputs

    ITC-T-60BU 60W USB Mixer Amplifier with Balanced and Unbalanced Microphone Inputs

    ITC-T-60BU Bangladesh

    Model: T-60BU
    • USB port and fluorescent screen to display the sound number
    • Previous, play/stop, next and repeat function buttons
    • Remote control over USB for EQ, volume up, volume down and mute
    • 70V, 100V and low impedance 4 to 16 ohms speaker output
    • Balanced and unbalanced microphone inputs
  • ITC T-61500 Series 1500 Watt Audio Amplifier Professional Power

    ITC T-61500 Series 1500 Watt Audio Amplifier Professional Power

    ITC T-61500 Bangladesh

    * Rack mount amplifier in 3U type

    * Rated power from 1000W to 1500W

    * 70V, 100V and 4-16ohm speaker outputs

    * Isolated transformer for human safety operation

    * Balanced XLR type line input and unbalanced 1/4 inch TRS phone jack line input

    * Balanced XLR type line output feeds to another power amplifier

    * Reliable protection of over heat, over load, clip & short circuit

    * Indications for power, signal, clip, protection and temp

    * Excellent device of radiator cooling fanner that ensures working effectively

  • ITC T-650B Economy Public Address Mixer Amplifier, 3U Rack Mount

    ITC T-650B Economy Public Address Mixer Amplifier, 3U Rack Mount

    ITC T-650B Bangladesh

    Model: T-650B
    • Mixer amplifier for paging and background music system
    • 3U rack mount design
    • 70V, 100V and low impedance 4-16ohm speaker output
    • Three Mic inputs by phone jack type
    • Mic 1 with VOX priority and VOX level on front panel
  • ITC T-550 Mixer Power Amplifier

    ITC T-550 Mixer Power Amplifier

    ITC T-550B Bangladesh

    * Mixer amplifier for paging and background music system
    * Rated power 550W
    * 3U rack mount
    * 70V, 100V and low impedance 4-16ohm speaker output
    * Three Mic inputs by phone jack type
    * Mic 1 with VOX priority and VOX level on front panel
    * Mic 2-3 by phone jack on rear panel
    * Two Aux Inputs and 2 line inputs for spare use
    * One EMC priority input
    * EMC has priority over all inputs except MIC1
    * Mic 1-3, Aux 1-2 and master volume controls and bass/treble tone control
    * Short circuit, overload and high temp protection

  • ITC T-60TB Mixer Amplifier with Audio Sources

    ITC T-60TB Mixer Amplifier with Audio Sources(MP3/TUNER/Bluetooth)

    ITC T-60TB Bangladesh

    *Standard rack mounted design (1U), SMT design

    *With mp3/TUNER/Bluetooth module,Digital screen displaying the current music from USB。

    *With mp3/TUNER/Bluetooth remote control function。

    *1EMC input,2AUX input,4MIC input。

    *Channel priority: EMC >MIC1>MIC2, MIC3, AUX1, AUX2。

    *Each channel has volume control function, master volume control and bass/treble tone control。

    *With level indicator, overload and protection indicator。

    *With high temp, overload & short-circuit protection.

    *2 output modes:100V、70V(non- Bridged mode)

    *High energy-efficient switching power supply and high-efficient power amplifier

    *Wide voltage power supply: 180V – 240 V can work normally.

  • ITC T-240B Public Address Mixer – 240W Power Rating

    ITC T-240B 240W Mixer Amplifier

    ITC T-240B Bangladesh

    • Mixer  amplifier system designed specifically for paging and background music
    • 240W power rating
    • 2U rack mount chassis
    • 70V, 100V and 4-16ohm low impedance speaker output
    • Three balanced microphone inputs
    • 1 x Front panel Mic input (phone jack) with VOX priority and VOX level on front panel
    • 2 x Rear Mic inputs (XLR) complete with phantom power
    • Two Auxiliary inputs and 2 line inputs for additional connectivity
    • Two EMC priority inputs
    • EMC 1 is designed to override all inputs except front panel Mic input
    • Master volume and tone (basstreble) controls
    • Comprehensive built-in short circuit, overload and high temperature protection
    • Optional DC 24V available on all models with a power rating of less than 500W
    • Optional fault monitoring module also available
  • ITC T-120B 120Watts Mixer Amplifier

    ITC T-120B 120Watts Mixer Amplifier

    ITC T-120B Bangladesh

    • Mixer  amplifier system designed specifically for paging and background music
    • 120W power rating
    • 2U rack mount chassis
    • 70V, 100V and 4-16ohm low impedance speaker output
    • Three balanced microphone inputs
    • 1 x Front panel Mic input (phone jack) with VOX priority and VOX level on front panel
    • 2 x Rear Mic inputs (XLR) complete with phantom power
    • Two Auxiliary inputs and 2 line inputs for additional connectivity
    • Two EMC priority inputs
    • EMC 1 is designed to override all inputs except front panel Mic input
    • Master volume and tone (basstreble) controls
    • Comprehensive built-in short circuit, overload and high temperature protection
    • Optional DC 24V available on all models with a power rating of less than 500W
    • Optional fault monitoring module also available
  • ITC T-60M Mixer Amplifier with Phone Jack

    ITC T-60M Mixer Amplifier with Phone Jack

    ITC T-60M Bangladesh

    *  3 MIC inputs, 2 AUX inputs

    *  3 MIC volume control, 2 AUX volume control

    *  With priority, MIC1 input is prior to other audio input

    *  There is a separate treble and bass adjustment knob

    *  One MIC2 / AUX1 selector switch, one MIC3 / AUX2 selector switch

    *  Two types of power output: 4 ohms constant resistance, 8 ohms output and constant voltage 70V, 100V output

    *  Single-channel rated power 35W / 60W output

  • ITC T-35M Bangladesh

    ITC T-35M Mixer Amplifier with Phone Jack

    ITC T-35M Bangladesh

     

    *  3 MIC inputs, 2 AUX inputs

    *  3 MIC volume control, 2 AUX volume control

    *  With priority, MIC1 input is prior to other audio input

    *  There is a separate treble and bass adjustment knob

    *  One MIC2 / AUX1 selector switch, one MIC3 / AUX2 selector switch

    *  Two types of power output: 4 ohms constant resistance, 8 ohms output and constant voltage 70V, 100V output

    *  Single-channel rated power 35W / 60W output

  • ITC T-67120 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system

    ITC T-67120 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system

    T-67120 Widely installed in weak-current rooms or branch control room for public address, built-in amplifier, widely used for a hall, corridor and outdoor public address.

    * T-67120 Standard 19 inch rack design, black aluminum panel, human-based handle, exquisite and high-class design.

    * 3.4-inch screen, 16 industrial-grade metal buttons, super anti-jamming performance, avoid instability infrared operation.

    * Adopt embedded computer technology and DSP audio processing technology; high-speed chip cut the start-up time less than 1 second.

    * Built-in one channel network hardware audio decoding module that supports TCP / IP, UDP, IGMP, could transmit 16 bits stereo CD audio signal.

    * Built-in Hi-Fi analog amplifier,60W/120W/240W/350W/500W, 4-16Ω output and 60W / 120W,

    70V-100V output.

    * One AUX and one MIC input, with independent volume control, treble and bass control, support paging without a network.

    * One EMC input for emergency audio signal input, with the highest priority.

    * One AUX output, connect with an external amplifier, industrial terminals with using screws for fixation to ensure connection reliability.

    * One three-wire volume with relay input, compatible with three-wire and four-wire wire fire cut, without 24V power supply, no limit on volume control quantity.

    * Built-in intelligent power management, automatically cut off the amplifier power when no signal input, power amplifier, automatically turn on when there is audio signal input, preset the program to get this function.

    * Support mute level reduction preset could preset background accompaniment.

    * Support remote on-demand. Support up to 1000 grades custom audio priority mute control.

    * Built-in audio processing to support multi-channel signal amplification and mixing, support three kinds of audio priority management.

    * Support DHCP, compatible router, switcher, bridges gateway, Modem, Intelnet, 2G, 3G, 4G, multicast, unicast and so on.

    * Support for at least three kinds of high-security authorization, the safety factor is higher than the Web remote configuration.

    * Authorized the operation allowance in control center, configure the username and password;

    * IOS menu management.

    * Support digital audio playback breakpoint play, to ensure the synchronization play.

    * Voice prompt when new configuration Sign-in.

    * T-67120 Support PSTN phone broadcast, support SMS voice broadcast.

    * Support mobile WIFI on-demand, wireless remote controller on-demand.

    * Support serial port expansion on-demand, remote on-demand, program selection, volume control.

    * Support 15KVESD protection, built-in anti-thunder processing circuit.

    * Optional redundant 24V dual power supply.

    * Status Indicator display, include a level indicator, protect indicator, standby indication.

    * One channel to download IP address serial port from PC, to modify IP address of decoding module.

    * Digital, easy expansion, no geographical restriction, no additional management equipment,

    without cables construction, easy installation.

    * Standby power less than 3W, Green and meet

  • ITC T-67240 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system

    ITC T-67240 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system

    The T-67240 IP amplifier is an ideal network audio solution for mid-sized systems that require an interface capable of streaming audio from the Internet and distributing an amplified signal to an installed speaker system.

    The T-67240 is able to transmit program material directly from the web to its inbuilt amplifier and then out to 100V, 70V or low impedance speakers.

    The T-67240 network amplifier is a 3U rack-mountable device and features a built-in power amplifier with a power rating of 240W. Via dual RJ45 connections, the T-67240 is easily installable anywhere on an existing TCPIP network making the requirement for dedicated and additional control cables redundant. Multiple speakers are connected directly to the unit and are powered by the built-in power amplifier.

    Ethernet connectivity provides many advantages such as extremely long cable runs as well as the ability to control the unit remotely and securely. The device can be accessed over IP and parameters such as local program selection, volume and device parameters such as the IP address can be managed remotely. The T-67240 enters into automatic enter standby mode if there is no input detected for 5 minutes and automatically reverts back to normal operation once signal returns.

    Additionally,  there is a local line level input for local inputs,  as well as a line level output. There are two levels of priority output: Voice evacuation system (given the highest priority by default) and a local input with secondary priority over program source. This setting can be customized as required. Indicators include output level meter, amplifier power indicator, a protection indicator, and equipment power indicator.

    The T-67240 features high temperature, overload and short circuit amplifier protection completely built-in. The system can have the addition of up to three wired volume controllers as optional extras.

  • ITC T-67350 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system

    ITC T-67350 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system

    The T-67350 IP amplifier is an ideal network audio solution for mid-sized systems that require an interface capable of streaming audio from the Internet and distributing the amplified signal to an installed speaker system.

    The T-67350 network amplifier is a 3U rack-mountable device and features a built-in power amplifier with a power rating of 350W. Via dual RJ45 connections, the T-67350 is easily installable anywhere on an existing TCPIP network making the requirement for dedicated and additional control cables redundant. Multiple speakers are connected directly to the unit and are powered by the built-in power amplifier.

    Ethernet connectivity provides many advantages such as extremely long cable runs as well as the ability to control the unit remotely and securely. The device can be accessed over IP and parameters such as local program selection, volume and device parameters such as the IP address can be managed remotely. The T-67350 enters into automatic enter standby mode if there is no input detected for 5 minutes and automatically reverts back to normal operation once signal returns.

    Additionally,  there is a local line level input for local inputs,  as well as a line level output. There are two levels of priority output: Voice evacuation system (given the highest priority by default) and a local input with secondary priority over program source. This setting can be customized as required. Indicators include output level meter, amplifier power indicator, a protection indicator, and equipment power indicator. The T-67350 features high temperature, overload and short circuit amplifier protection completely built-in. The system can have the addition of up to three wired volume controllers as optional extras.

  • ITC T-67500 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5 cable system

    ITC T-67500 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5 cable system

    ITC T-67500 IP Based PA System Network Audio Amplifier 500W

    1) Standard rack mount design and it’s in brushed aluminum case.
    2) It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.
    3) It’s built in DSP so that it could process information quickly and start up less than 1s.
    4) It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP,
    5) IGMP, which achieve transmitting stereo audio in 16 bit in the network
    6) It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.
    7) With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.
    8) With 1 EMC input with highest priority.
    9) With 1 AUX output to connect external power amplifier.
    10) With 1 3-wire forced switching output for volume control.
    11) Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa, users could write program to control the power.
    12) With function to preset the mute depth and the background music.
    13) Support remotely unicast.
    14) Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.
    15) Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.
    16) With authorization operation management system.
    17) Support PSTN phone broadcast and SM voice broadcast.
    18) Support on demand unicast via Wifi and IR remote controller.
    19) Support spare line design for power supply at DC 24V
    20) With indicator to display status, level, protection, standby, etc.
    21) Support PC to modify its IP address via its serial port.
    22) This IP PA system adopt common network design so that the installation is convenient.
    23) Standby power is less than 3W.

  • ITC T-77120 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5 cable system

    T-77120 IP Network Class D Power Amplifier

    T-77120 widely installed in weak-current rooms or branch control room for public address, built-in amplifier, widely used for the hall, corridor and outdoor public address.

    1) Standard 19 inch rack design, black aluminum panel, human-based handle, exquisite and high-class design.
    2) 3.4 inch industrial-grade LCD screen, super anti-jamming performance, avoid instability infrared operation, clearly show most lattice pattern, and the machine working status.
    3) Adopt embedded computer technology and DSP audio processing technology; high-speed chip cut the start-up time less than 1 second.
    4) Built-in one channel network hardware audio decoding module that supports TCP / IP, UDP, IGMP(IP multi-Cast protocol), could transmit 16 bits stereo CD audio sign.
    5) Built-in Hi-Fi analog amplifier,60W/120W/240W/350W/500W, 4-16Ω output and and constant voltage 70V-100V output.
    6) One AUX and one MIC input, with independent volume control, treble and bass control, support paging without network.
    7) One EMC input, fire emergency audio signal input with the highest priority
    8) Two AUX outputs, connect with external amplifier, standard interfaces RCA port, Wiring connection is very convenient.
    9) One three-wire volume with relay output, without forced cutting power supply, compatible with four-wire fire cutting, need to connect with 24V power supply.
    10) Built-in intelligent power management, automatically cut off the amplifier power when no signal input , power amplifier, automatically turn on when there is audio signal input, preset the program to get this function.
    11) Built three priority setting:
    1. EMC is the highest priority.
    2. Network alarm signal priority MIC, AUX and network background music signal.
    3. MIC priority AUX and network background music signal.
    4. AUX and background music same level, without any priority.
    12) Support silent intensity preset reduction, support for background accompaniment preset
    function; Support status lights display, including level indicator, protection indicator, standby light, etc. Machine standby power less than 3W, meet the national environmental energy certification
    standards.
    13) Support DHCP, compatible routers, switches, bridges gateways, Modem, Internet, 2G, 3G, 4G,
    multicast, unicast and other arbitrary network structure.
    14) Digital products, easy expansion, no geographical restriction, no additional management
    equipment, without cables construction, easy installation.

Amplifier Price in Bangladesh:

Toa, Ahuja, Bosch, ITC Amplifier Price in Bangladesh. Public address System wholesaler in Bangladesh. Public address System price in Bangladesh. Best PA System company in Bangladesh. Best Public address System company in Bangladesh. Sound System Bangladesh. Sound System price in Bangladesh.
Latest Amplifier Price List in Bangladesh 2023:

Best Amplifier List in BD, 2023

Latest Price
Toa A-1724 6-Microphone Input High Performance Amplifier
৳ 55,000
Toa A-2060 High Performance 60 Watt Mixer Power Amplifier
৳ 22,500
Toa A-2240 Five Channel Wide Frequency Mixer Power Amplifier
৳ 48,000
Toa A2120 High Cost-Performance Mixer Power Amplifier
৳ 26,500
Toa A-2030 High Performance 30 Watt Mixer Power Amplifier
৳ 14,000

Main Menu