• 120 watts
• Mixer amplifier for paging and background music system
• 2U rack mount (less than 350W) and 3U rack mount design
• 70V, 100V and low impedance 4-16ohm speaker output
• Three balanced Mic input
• Mic 1(phone jack) with VOX priority and VOX level on front panel
• Mic 2-3 by XLR type on rear panel with phantom power
• Two Aux Inputs and 2 line inputs for spare use
• One EMC priority input
• EMC has priority over all inputs except MIC1
• Mic 1-3, Aux 1-2 and master volume controls and bass/treble tone control
• Short circuit, overload and high temp protection

T-6707 IP Network Active Speaker with Class-D Amplifier

The T-6707 is an all in one IP/TCP network audio system solution, which is the most convenient audio over internet solution of which no signal cable and no speaker cable wiring is needed. The simplest connection is plug in the RJ45 communication port, input source, paralleled connect with another passive speaker, power on, then it can communicate with the server and enable all functions of a network audio system.

The T-6707 IP network active speaker package includes an IP network active speaker and a passive low impedance speaker. The IP network active speaker is built-in decoder, an active speaker with stereo 30W+30W digital class-D amplifier and a 30W passive speaker, the speaker output could be selected as 10W, 20W or 30W The connectors of this active speaker include one communication control port by RJ45, two reversed communication port by RJ45, one RCA input, one serial communication port for write-in or change IP use, one 10w power output to amplify another passive speaker, with balance and volume attenuation, AC power switch, one status and one power indicators.

The IP network active speaker package is of wall mount design, so it cloud be installed in anywhere of the non-dedicated network. It is the high economy solution to use one this package for each classroom, hospital, prison, and office such multiple room applications.

The biggest advantages of the network audio system are Super distance audio transmission, simultaneous maximum program task, and non-dedicated network wiring.

* IP network audio active speaker package.

* One IP network audio active speaker and one passive speaker.

* The network audio active speaker is built-in network decoder, an active speaker built-in a stereo 30W+30W digital class-D amplifier and a 30W passive speaker.

* Economy solution for multiple room applications.

* Each room only installed one pair of loudspeakers.

* Anywhere of the LAN system of the non-dedicated network system.

* No need aux cable and speaker cable wiring.

* Control data and aux data transmission both by CAT 5 cable.

* One aux input and one RJ45 control LAN input.

* One low impedance power output for another 8ohm 10W passive speaker.

* One serial communication port is only used to write in or change IP address.

* One status and one power indicators.

* Balance output and master volume attenuation.

ITC T-77350 Multi-zone Audio Power Amplifier for IP Network Based PA System

Widely installed in weak-current rooms or branch control room for public address, built-in amplifier, widely used for the hall, corridor and outdoor public address.

T-77350 Features:

*Standard 19 inch rack design, black aluminum panel, human-based handle, exquisite and high-class design.
*3.4 inches industrial-grade LCD screen, super anti-jamming performance, avoid instability infrared operation, clearly show most lattice pattern and the machine working status.
*Adopt embedded computer technology and DSP audio processing technology; high-speed chip cut the start-up time less than 1 second.
*Built-in one channel network hardware audio decoding module that supports TCP / IP, UDP, IGMP(IP multi-Cast protocol), could transmit 16 bits stereo CD audio sign.
*Built-in Hi-Fi analog amplifier,350W, 4-16Ω output, and constant voltage 70V-100V output.
*One AUX and one MIC input, with independent volume control, treble and bass control, support paging without a network.
*One EMC input, fire emergency audio signal input with the highest priority
*Two AUX outputs, connect with an external amplifier, standard interfaces RCA port, Wiring connection is very convenient.
*One three-wire volume with relay output, without forced cutting power supply, compatible with four-wire fire cutting, need to connect with 24V power supply.
*Built-in intelligent power management, automatically cut off the amplifier power when no signal input, power amplifier, automatically turn on when there is audio signal input, preset the program to get this function.
*Built three priority setting:
1. EMC is the highest priority.
2. Network alarm signal priority MIC, AUX and network background music signal.
3. MIC priority AUX and network background music signal.
4. AUX and background music same level, without any priority.
*Support silent intensity preset reduction, support for background accompaniment preset
function; Support status lights display, including a level indicator, protection indicator, standby light, etc. Machine standby power less than 3W, meet the national environmental energy certification
standards.
*Support DHCP, compatible routers, switches, bridges gateways, Modem, Internet, 2G, 3G, 4G,
multicast, unicast and other arbitrary network structure.
*Digital products, easy expansion, no geographical restriction, no additional management
equipment, without cables construction, easy installation.