ITC T-60B 60W RMS Mixer Amplifier, 3 mic, 2 aux, 100V 70V and 4ohms , balanced mic
ITC T-60B T-120B T-240B Mixer Amplifier (XLR Balance MIC Input + Phantom Power)
The basic public address mixer amplifiers have power ratings from 60W, 120W, 240W, 350W,
500W to 650W. They are featured of 3 balanced microphone inputs, 2 aux inputs and 1 EMC
input. Priority muting is achieved via EMC for overriding other inputs except Mic1 on front
panel. Individual gain controls are provided for Mic 1-3 and Aux 1-2, bass and treble controls
and master volume control are provided for overall tone control. 70V, 100V and low
impedance 4-16ohms speaker outputs are provided. Extensive protection from short-circuit,
overload and high temp.
* Mixer amplifier for paging and background music system
* Rated power from 60W, 120W, 240W, 350W, 500W to 650W
* 2U rack mount (less than 350W) and 3U rack mount design
* 70V, 100V and low impedance 4-16ohm speaker output
* Three balanced Mic input
* Mic 1(phone jack) with VOX priority and VOX level on front panel
* Mic 2-3 by XLR type on rear panel with phantom power
* Two Aux Inputs and 2 line inputs for spare use
* One EMC priority input
* EMC has priority over all inputs except MIC1
* Mic 1-3, Aux 1-2 and master volume controls and bass/treble tone control
* Short circuit, overload and high temp protection
Optional
* DC 24V available on less than 500W models
* Panel with/without handhold
* Faults monitoring module, it can output short circuit signal to achieve main/spare amplifier
Switch
ITC T-7723 IP Network Fire Alarm Panel
T-7723 IP Network Fire Alarm Panel
Used in Fire service center to acquire firm alarm circuit.
*T-7723 standard rack mount design, 1U height, high-grade brushed aluminum panels, sophisticated
technology, all show high-end temperament.
*Equipment adopts embedded industrial-grade dual-core processing chip (ARM + DSP), start time is less than 1S.
*16 channel fire short-circuit signal input, can be unlimited extension input interface, convenient for the larger system.
*Support a key to restore the factory function, maximum convenient system maintenance, and
management.
*Panel supports a key to cancel the task.
*Standard network interface, full-speed connections are up to 1000M.ITC T-6707 IP Network Active Speaker, built-in 2×10W Amp
T-6707 IP Network Active Speaker with Class-D Amplifier
The T-6707 is an all in one IP/TCP network audio system solution, which is the most convenient audio over internet solution of which no signal cable and no speaker cable wiring is needed. The simplest connection is plug in the RJ45 communication port, input source, paralleled connect with another passive speaker, power on, then it can communicate with the server and enable all functions of a network audio system.
The T-6707 IP network active speaker package includes an IP network active speaker and a passive low impedance speaker. The IP network active speaker is built-in decoder, an active speaker with stereo 30W+30W digital class-D amplifier and a 30W passive speaker, the speaker output could be selected as 10W, 20W or 30W The connectors of this active speaker include one communication control port by RJ45, two reversed communication port by RJ45, one RCA input, one serial communication port for write-in or change IP use, one 10w power output to amplify another passive speaker, with balance and volume attenuation, AC power switch, one status and one power indicators.
The IP network active speaker package is of wall mount design, so it cloud be installed in anywhere of the non-dedicated network. It is the high economy solution to use one this package for each classroom, hospital, prison, and office such multiple room applications.
The biggest advantages of the network audio system are Super distance audio transmission, simultaneous maximum program task, and non-dedicated network wiring.
* IP network audio active speaker package.
* One IP network audio active speaker and one passive speaker.
* The network audio active speaker is built-in network decoder, an active speaker built-in a stereo 30W+30W digital class-D amplifier and a 30W passive speaker.
* Economy solution for multiple room applications.
* Each room only installed one pair of loudspeakers.
* Anywhere of the LAN system of the non-dedicated network system.
* No need aux cable and speaker cable wiring.
* Control data and aux data transmission both by CAT 5 cable.
* One aux input and one RJ45 control LAN input.
* One low impedance power output for another 8ohm 10W passive speaker.
* One serial communication port is only used to write in or change IP address.
* One status and one power indicators.
* Balance output and master volume attenuation.
ITC T-6707L IP Network Active Speaker, built-in 2×10W Amp (Offline Timing Play)
T-6707L IP Network Active Speakers
Apply to ordinary classrooms, multimedia classrooms, offices, meeting rooms and other places of broadcast and local broadcast.
* Professional integration of wall-mounted design, exquisite appearance, sophisticated technology, filling the high-end temperament.
* Equipment with embedded computer technology and DSP audio processing technology design; high-speed industrial-grade chips, the start-up time of less than 1 second.
* Built 1 channel network hardware audio decoding module that supports T CP/ IP, UDP, IGMP (multicast) protocol for network transmission 16 CD-quality stereo audio signal.
* Support initiative to take over the task when off-network, off-server, enabling the terminal disconnection autoplay function.
* Built-in 4G high-capacity storage space, the program can be pushed through the network to a remote memory storage, maximum storage 1000 groups of data, the digital audio storage capacity of at least 60 hours, data storage of no less than 10 years.
* Built-in high-precision digital timing clock chip, the largest power outage timing is not less than 3 years, support intelligent network timing, and server error is less than 0.05 seconds.
* With intelligent media library and intelligent caching capabilities, self-aware caching technology applications, optimize bandwidth usage, saving up to 99% of the network bandwidth.
* Built-in 2 x 10W / 20W / 30W (8 loads) stereo power amplifier module, the sound is smooth, power is strong, can select the network power, support left and right channel volume balance and adjustment.
* 1 line (AUX) and 1 microphone (MIC) inputs with separate volume control, and support for off-network paging function.
* Built-in audio processing circuitry to support multi-channel signal amplification, mixing, support three class audio priority management.
* Support for 1000 classes audio priority mute control.
* Support PSTN phone broadcasting, support SMS voice broadcast.
* Support mobile WIFI on demand, wireless remote control on demand.
* Support panel serial port expansion on demand, to achieve remote programming on demand, program selections, adjust the volume.
* Support for server management functions authorized to operate a unified, unified configuration management user and password.
* Support DHCP, compatible routers, switches, bridges, gateways, Modem, Intelnet, 2G, 3G, 4G, multicast, unicast and other random network structure.
* Firmware supports a variety of upgraded solutions, such as network upgrade, serial upgrade.
* Support for the new configuration registered intelligent voice prompts.
* Support 15KVESD protection, built-in network isolation mine processing circuit.
* One IP address reset button, if you lose the IP address, can restore the factory IP address.
* 1 channel to download the PC serial port IP address, is used to modify the IP address of network decoding module.
* Digital products, expansion of convenience, without geographical restrictions, no additional room management equipment, total net free line construction design, easy to install.
ITC T-1S01 Mixer Pre-amplifier, 5 mic input, 3 aux, AC 230V and DC 24V
ITC T-1S01 Multiple Input and 1 Output Support Phantom Power Pre Amp
T-319 is remote control microphone to work with T-1S01, pre-amplifier for remote control. Features of 1kms remote distance control and remote paging and priority over other inputs. Priority muting is achieved via MIC 1 and EMC 1 for overriding music for paging and emergency alarms. Individual gain controls are provided for MIC and AUX inputs, bass and treble controls are provided for overall tone control.
* 5-channel MIC input and 3-channel Aux input.
* With 1-channel EMC input.
* Independent volume control, MASTER volume control.
* With compulsive insert and Priority function.
* MIC balance input interface With phantom POWER.
* Individual Gain Controls for MIC
* EMC1 has priority over all inputs except MIC1
* Bass and Treble Tone Controls
* AC 120V or 230V and DC 24V operation
ITC T-6216 16-Channel Power Sequencer, work with timer to automatically power on/off other unit
- With standard chassis design and 2U aluminum alloy panel; personalized handle design, good appearance and practical.
- 16 power outputs, each outputs AC220V (10A).
- With electronic lock switch, 2 modes: manual and automatically.
- 16 power sockets connect or disconnects in turn. The time between the two waysis 1S.
- The full capacity of power socket gets 6KVA.
- 1 input interface with 24V fire signal, 1 signal output triggered by fire short circuit emergency.
- 1 short circuit triggered signal input. 1 expandable output triggered by short circuit, It can connect a timer, intelligent machine to realize automatically control.
- Concise LED working status display indicators.
ITC T-77350 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5 cable system
ITC T-77350 Multi-zone Audio Power Amplifier for IP Network Based PA System
Widely installed in weak-current rooms or branch control room for public address, built-in amplifier, widely used for the hall, corridor and outdoor public address.
T-77350 Features:
*Standard 19 inch rack design, black aluminum panel, human-based handle, exquisite and high-class design.
*3.4 inches industrial-grade LCD screen, super anti-jamming performance, avoid instability infrared operation, clearly show most lattice pattern and the machine working status.
*Adopt embedded computer technology and DSP audio processing technology; high-speed chip cut the start-up time less than 1 second.
*Built-in one channel network hardware audio decoding module that supports TCP / IP, UDP, IGMP(IP multi-Cast protocol), could transmit 16 bits stereo CD audio sign.
*Built-in Hi-Fi analog amplifier,350W, 4-16Ω output, and constant voltage 70V-100V output.
*One AUX and one MIC input, with independent volume control, treble and bass control, support paging without a network.
*One EMC input, fire emergency audio signal input with the highest priority
*Two AUX outputs, connect with an external amplifier, standard interfaces RCA port, Wiring connection is very convenient.
*One three-wire volume with relay output, without forced cutting power supply, compatible with four-wire fire cutting, need to connect with 24V power supply.
*Built-in intelligent power management, automatically cut off the amplifier power when no signal input, power amplifier, automatically turn on when there is audio signal input, preset the program to get this function.
*Built three priority setting:
1. EMC is the highest priority.
2. Network alarm signal priority MIC, AUX and network background music signal.
3. MIC priority AUX and network background music signal.
4. AUX and background music same level, without any priority.
*Support silent intensity preset reduction, support for background accompaniment preset
function; Support status lights display, including a level indicator, protection indicator, standby light, etc. Machine standby power less than 3W, meet the national environmental energy certification
standards.
*Support DHCP, compatible routers, switches, bridges gateways, Modem, Internet, 2G, 3G, 4G,
multicast, unicast and other arbitrary network structure.
*Digital products, easy expansion, no geographical restriction, no additional management
equipment, without cables construction, easy installation.ITC T-77240 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5 cable system
Installed in low voltage or sub-control room in the radio management area, built-in power
amplifier with high-fidelity, suitable for the hall, corridor, outdoor and other areas of the program
broadcast and local radio.
* Standard 19 inch rack design, black aluminum panel, solid handle, professional mechanical assembly process, the appearance is very high-end.
* Industrial-grade LCD display in 3.4-inch , it can clearly show the majority of dot pattern and machine working status; equipped with infrared remote control, on-demand all contents in server program library, available to control the playback / pause, flexible and simple operation.
* With embedded computer and DSP audio processing technology, high-speed industrial-grade SCM system chip, start time is less than 1 second.
* Built-in 1 network hardware audio decoding module, support TCP / IP, UDP, IGMP (multicast protocol), to achieve network transmission 16-bit CD audio quality audio signal.
* Built-in high-fidelity professional analog amplifier, with 60W / 120W / 240W / 350W / 500W constant resistance (4-16Ω) and constant pressure (70V, 100V) power output.
* 1 line (AUX) and 1 microphone (MIC) input interface, with independent volume and treble/bass adjustment potentiometer control, support broken network local paging function.
* 1 channel EMC input interface, enter the emergency alarm voice signal is direct connection (Without switching), with the highest priority.
* 2-channel audio signal auxiliary output interface, can extend to external connect power amplifier, the standard lotus seat interface, wiring connection is very convenient.
* 1 way of three-wire volume control relay output interface, no need 24V power supply, it compatible with four-wire volume control alarm relay output at the same time, it needs DC 24V relay power supply.
* Built-in intelligent power management, when there is no music or call, it will automatically cut off the power amplifier, when there is signal, it will automatically turn on the power amplifier, support IP software programming pre-open power amplifier function.
* Built-in 3 priority settings
* EMC with the highest priority.
* The network alarm signal has higher priority than MIC, AUX and network background music signals.
* MIC has higher priority than AUX and network background music signals.
* AUX and network background music for the same priority level.
* Support silence intensity preset decrease function, support background accompaniment preset function; support status light display, including level indicator, protection indicator, standby light and so on. Machine standby power is less than 3W, to meet the national environmental protection and energy saving certification standards.
* Compatible with routers, switches, bridge gateway, Modem, Internet, 2G, 3G, 4G, multicast, unicast and any other network structure.
* Digitalized products, easy expansion, not limited by geographical location, no need to increase the engine room management equipment, adopt a total network of free road construction design, easy to install.
* It supports remote hardware upgrade of the terminal, no need to upgrade at the local site, to reduce maintenance burdens and make more simple operation.
ITC T-77120 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5 cable system
T-77120 IP Network Class D Power Amplifier
T-77120 widely installed in weak-current rooms or branch control room for public address, built-in amplifier, widely used for the hall, corridor and outdoor public address.
1) Standard 19 inch rack design, black aluminum panel, human-based handle, exquisite and high-class design.
2) 3.4 inch industrial-grade LCD screen, super anti-jamming performance, avoid instability infrared operation, clearly show most lattice pattern, and the machine working status.
3) Adopt embedded computer technology and DSP audio processing technology; high-speed chip cut the start-up time less than 1 second.
4) Built-in one channel network hardware audio decoding module that supports TCP / IP, UDP, IGMP(IP multi-Cast protocol), could transmit 16 bits stereo CD audio sign.
5) Built-in Hi-Fi analog amplifier,60W/120W/240W/350W/500W, 4-16Ω output and and constant voltage 70V-100V output.
6) One AUX and one MIC input, with independent volume control, treble and bass control, support paging without network.
7) One EMC input, fire emergency audio signal input with the highest priority
8) Two AUX outputs, connect with external amplifier, standard interfaces RCA port, Wiring connection is very convenient.
9) One three-wire volume with relay output, without forced cutting power supply, compatible with four-wire fire cutting, need to connect with 24V power supply.
10) Built-in intelligent power management, automatically cut off the amplifier power when no signal input , power amplifier, automatically turn on when there is audio signal input, preset the program to get this function.
11) Built three priority setting:
1. EMC is the highest priority.
2. Network alarm signal priority MIC, AUX and network background music signal.
3. MIC priority AUX and network background music signal.
4. AUX and background music same level, without any priority.
12) Support silent intensity preset reduction, support for background accompaniment preset
function; Support status lights display, including level indicator, protection indicator, standby light, etc. Machine standby power less than 3W, meet the national environmental energy certification
standards.
13) Support DHCP, compatible routers, switches, bridges gateways, Modem, Internet, 2G, 3G, 4G,
multicast, unicast and other arbitrary network structure.
14) Digital products, easy expansion, no geographical restriction, no additional management
equipment, without cables construction, easy installation.ITC T-67500 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5 cable system
ITC T-67500 IP Based PA System Network Audio Amplifier 500W
1) Standard rack mount design and it’s in brushed aluminum case.
2) It’s with industrial LCD screen in 3.4 inch and it’s anti-IR interference.
3) It’s built in DSP so that it could process information quickly and start up less than 1s.
4) It’s built in codec module to process network audio and it supports multiple protocol including TCP/IP, UDP,
5) IGMP, which achieve transmitting stereo audio in 16 bit in the network
6) It’s built in hifi analog amplifier(60W/120W/240W/350W/500W) with constant voltage output at 70V or 100V and constant impedance output at 4 to 16 ohm.
7) With 1 AUX input and 1 Mic input with individual treble/bass control and volume control.
8) With 1 EMC input with highest priority.
9) With 1 AUX output to connect external power amplifier.
10) With 1 3-wire forced switching output for volume control.
11) Built in intelligent power management. When signal is input, it would be turned on automatically. Vice versa, users could write program to control the power.
12) With function to preset the mute depth and the background music.
13) Support remotely unicast.
14) Support DHCP and it’s compatible to multiple network structure including router, switcher, gateway bridge, moderm, intelnet, 2G, 3G, 4G, multicast, unicast, etc.
15) Support at least 3 kinds of safe authorization IP configuration and its safety factor is higher than remote configuration of Web.
16) With authorization operation management system.
17) Support PSTN phone broadcast and SM voice broadcast.
18) Support on demand unicast via Wifi and IR remote controller.
19) Support spare line design for power supply at DC 24V
20) With indicator to display status, level, protection, standby, etc.
21) Support PC to modify its IP address via its serial port.
22) This IP PA system adopt common network design so that the installation is convenient.
23) Standby power is less than 3W.
ITC T-67350 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system
The T-67350 IP amplifier is an ideal network audio solution for mid-sized systems that require an interface capable of streaming audio from the Internet and distributing the amplified signal to an installed speaker system.
The T-67350 network amplifier is a 3U rack-mountable device and features a built-in power amplifier with a power rating of 350W. Via dual RJ45 connections, the T-67350 is easily installable anywhere on an existing TCPIP network making the requirement for dedicated and additional control cables redundant. Multiple speakers are connected directly to the unit and are powered by the built-in power amplifier.
Ethernet connectivity provides many advantages such as extremely long cable runs as well as the ability to control the unit remotely and securely. The device can be accessed over IP and parameters such as local program selection, volume and device parameters such as the IP address can be managed remotely. The T-67350 enters into automatic enter standby mode if there is no input detected for 5 minutes and automatically reverts back to normal operation once signal returns.
Additionally, there is a local line level input for local inputs, as well as a line level output. There are two levels of priority output: Voice evacuation system (given the highest priority by default) and a local input with secondary priority over program source. This setting can be customized as required. Indicators include output level meter, amplifier power indicator, a protection indicator, and equipment power indicator. The T-67350 features high temperature, overload and short circuit amplifier protection completely built-in. The system can have the addition of up to three wired volume controllers as optional extras.
ITC T-67240 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system
The T-67240 IP amplifier is an ideal network audio solution for mid-sized systems that require an interface capable of streaming audio from the Internet and distributing an amplified signal to an installed speaker system.
The T-67240 is able to transmit program material directly from the web to its inbuilt amplifier and then out to 100V, 70V or low impedance speakers.
The T-67240 network amplifier is a 3U rack-mountable device and features a built-in power amplifier with a power rating of 240W. Via dual RJ45 connections, the T-67240 is easily installable anywhere on an existing TCPIP network making the requirement for dedicated and additional control cables redundant. Multiple speakers are connected directly to the unit and are powered by the built-in power amplifier.
Ethernet connectivity provides many advantages such as extremely long cable runs as well as the ability to control the unit remotely and securely. The device can be accessed over IP and parameters such as local program selection, volume and device parameters such as the IP address can be managed remotely. The T-67240 enters into automatic enter standby mode if there is no input detected for 5 minutes and automatically reverts back to normal operation once signal returns.
Additionally, there is a local line level input for local inputs, as well as a line level output. There are two levels of priority output: Voice evacuation system (given the highest priority by default) and a local input with secondary priority over program source. This setting can be customized as required. Indicators include output level meter, amplifier power indicator, a protection indicator, and equipment power indicator.
The T-67240 features high temperature, overload and short circuit amplifier protection completely built-in. The system can have the addition of up to three wired volume controllers as optional extras.
ITC T-67120 Rack Mount Network Audio Adapter withRMS 60W power amplifier, LAN CAT5cable system
T-67120 Widely installed in weak-current rooms or branch control room for public address, built-in amplifier, widely used for a hall, corridor and outdoor public address.
* T-67120 Standard 19 inch rack design, black aluminum panel, human-based handle, exquisite and high-class design.
* 3.4-inch screen, 16 industrial-grade metal buttons, super anti-jamming performance, avoid instability infrared operation.
* Adopt embedded computer technology and DSP audio processing technology; high-speed chip cut the start-up time less than 1 second.
* Built-in one channel network hardware audio decoding module that supports TCP / IP, UDP, IGMP, could transmit 16 bits stereo CD audio signal.
* Built-in Hi-Fi analog amplifier,60W/120W/240W/350W/500W, 4-16Ω output and 60W / 120W,
70V-100V output.
* One AUX and one MIC input, with independent volume control, treble and bass control, support paging without a network.
* One EMC input for emergency audio signal input, with the highest priority.
* One AUX output, connect with an external amplifier, industrial terminals with using screws for fixation to ensure connection reliability.
* One three-wire volume with relay input, compatible with three-wire and four-wire wire fire cut, without 24V power supply, no limit on volume control quantity.
* Built-in intelligent power management, automatically cut off the amplifier power when no signal input, power amplifier, automatically turn on when there is audio signal input, preset the program to get this function.
* Support mute level reduction preset could preset background accompaniment.
* Support remote on-demand. Support up to 1000 grades custom audio priority mute control.
* Built-in audio processing to support multi-channel signal amplification and mixing, support three kinds of audio priority management.
* Support DHCP, compatible router, switcher, bridges gateway, Modem, Intelnet, 2G, 3G, 4G, multicast, unicast and so on.
* Support for at least three kinds of high-security authorization, the safety factor is higher than the Web remote configuration.
* Authorized the operation allowance in control center, configure the username and password;
* IOS menu management.
* Support digital audio playback breakpoint play, to ensure the synchronization play.
* Voice prompt when new configuration Sign-in.
* T-67120 Support PSTN phone broadcast, support SMS voice broadcast.
* Support mobile WIFI on-demand, wireless remote controller on-demand.
* Support serial port expansion on-demand, remote on-demand, program selection, volume control.
* Support 15KVESD protection, built-in anti-thunder processing circuit.
* Optional redundant 24V dual power supply.
* Status Indicator display, include a level indicator, protect indicator, standby indication.
* One channel to download IP address serial port from PC, to modify IP address of decoding module.
* Digital, easy expansion, no geographical restriction, no additional management equipment,
without cables construction, easy installation.
* Standby power less than 3W, Green and meet
ITC T-35M Mixer Amplifier with Phone Jack
ITC T-35M Bangladesh
* 3 MIC inputs, 2 AUX inputs
* 3 MIC volume control, 2 AUX volume control
* With priority, MIC1 input is prior to other audio input
* There is a separate treble and bass adjustment knob
* One MIC2 / AUX1 selector switch, one MIC3 / AUX2 selector switch
* Two types of power output: 4 ohms constant resistance, 8 ohms output and constant voltage 70V, 100V output
* Single-channel rated power 35W / 60W output
ITC T-60M Mixer Amplifier with Phone Jack
ITC T-60M Bangladesh
* 3 MIC inputs, 2 AUX inputs
* 3 MIC volume control, 2 AUX volume control
* With priority, MIC1 input is prior to other audio input
* There is a separate treble and bass adjustment knob
* One MIC2 / AUX1 selector switch, one MIC3 / AUX2 selector switch
* Two types of power output: 4 ohms constant resistance, 8 ohms output and constant voltage 70V, 100V output
* Single-channel rated power 35W / 60W output
ITC T-120B 120Watts Mixer Amplifier
ITC T-120B Bangladesh
- Mixer amplifier system designed specifically for paging and background music
- 120W power rating
- 2U rack mount chassis
- 70V, 100V and 4-16ohm low impedance speaker output
- Three balanced microphone inputs
- 1 x Front panel Mic input (phone jack) with VOX priority and VOX level on front panel
- 2 x Rear Mic inputs (XLR) complete with phantom power
- Two Auxiliary inputs and 2 line inputs for additional connectivity
- Two EMC priority inputs
- EMC 1 is designed to override all inputs except front panel Mic input
- Master volume and tone (basstreble) controls
- Comprehensive built-in short circuit, overload and high temperature protection
- Optional DC 24V available on all models with a power rating of less than 500W
- Optional fault monitoring module also available
ITC T-240B 240W Mixer Amplifier
ITC T-240B Bangladesh
- Mixer amplifier system designed specifically for paging and background music
- 240W power rating
- 2U rack mount chassis
- 70V, 100V and 4-16ohm low impedance speaker output
- Three balanced microphone inputs
- 1 x Front panel Mic input (phone jack) with VOX priority and VOX level on front panel
- 2 x Rear Mic inputs (XLR) complete with phantom power
- Two Auxiliary inputs and 2 line inputs for additional connectivity
- Two EMC priority inputs
- EMC 1 is designed to override all inputs except front panel Mic input
- Master volume and tone (basstreble) controls
- Comprehensive built-in short circuit, overload and high temperature protection
- Optional DC 24V available on all models with a power rating of less than 500W
- Optional fault monitoring module also available
ITC T-60TB Mixer Amplifier with Audio Sources(MP3/TUNER/Bluetooth)
ITC T-60TB Bangladesh
*Standard rack mounted design (1U), SMT design
*With mp3/TUNER/Bluetooth module，Digital screen displaying the current music from USB。
*With mp3/TUNER/Bluetooth remote control function。
*1EMC input，2AUX input，4MIC input。
*Channel priority: EMC >MIC1>MIC2, MIC3, AUX1, AUX2。
*Each channel has volume control function, master volume control and bass/treble tone control。
*With level indicator, overload and protection indicator。
*With high temp, overload & short-circuit protection.
*2 output modes：100V、70V（non- Bridged mode）
*High energy-efficient switching power supply and high-efficient power amplifier
*Wide voltage power supply: 180V – 240 V can work normally.
ITC T-550 Mixer Power Amplifier
ITC T-550B Bangladesh
* Mixer amplifier for paging and background music system
* Rated power 550W
* 3U rack mount
* 70V, 100V and low impedance 4-16ohm speaker output
* Three Mic inputs by phone jack type
* Mic 1 with VOX priority and VOX level on front panel
* Mic 2-3 by phone jack on rear panel
* Two Aux Inputs and 2 line inputs for spare use
* One EMC priority input
* EMC has priority over all inputs except MIC1
* Mic 1-3, Aux 1-2 and master volume controls and bass/treble tone control
* Short circuit, overload and high temp protection
Amplifier Price in Bangladesh:
Toa, Ahuja, Bosch, ITC Amplifier Price in Bangladesh. Public address System wholesaler in Bangladesh. Public address System price in Bangladesh. Best PA System company in Bangladesh. Best Public address System company in Bangladesh. Sound System Bangladesh. Sound System price in Bangladesh.
Latest Amplifier Price List in Bangladesh 2023:
Best Amplifier List in BD, 2023
Latest Price
Toa A-1724 6-Microphone Input High Performance Amplifier
৳ 55,000
Toa A-2060 High Performance 60 Watt Mixer Power Amplifier
৳ 22,500
Toa A-2240 Five Channel Wide Frequency Mixer Power Amplifier
৳ 48,000
Toa A2120 High Cost-Performance Mixer Power Amplifier
৳ 26,500
Toa A-2030 High Performance 30 Watt Mixer Power Amplifier
৳ 14,000